Spider Eyes

/* 
 * File:   spider2main.c
 * Author: hmikelson
 *
 * Created on March 24, 2015, 4:30 PM
 */

#if defined(__XC)
    #include <xc.h>         /* XC8 General Include File */
#elif defined(HI_TECH_C)
    #include <htc.h>        /* HiTech General Include File */
#endif

#include <stdint.h>        /* For uint8_t definition */
#include <stdbool.h>       /* For true/false definition */
#include <stdlib.h>     /*rand()*/

#pragma config MCLRE=OFF,CP=OFF,WDTE=OFF,FOSC=INTOSCIO
#define _XTAL_FREQ 4000000
uint8_t sGPIO;

void init()
{
    //Configure GPIO Port
    ANSEL =  0b00000000;  //Configure all GPIO pins as digital
    TRISIO = 0b11001000;  //Set GP3 as input and the rest as outputs
    OPTION_REGbits.nGPPU = 0;
    WPU = 0b00000100;     //Enable weak pullups on GP2
    //Configuer AD Convertor
    ADCON0 = 0x00;        //AD disabled
    ADRESH = 0x00;        //Init the AD Register
    //Configure Comparator
    CMCON0 = 0xFF;   // Comparator is turned off
    CMCON1 = 0x00;   // Comparator is turned off
    //Interrupt configuration
    INTCON = 0x00;   //Disable all interrupts
}

void vdelay(int n)
{
    int i;
    for (i=0;i<=n;i++)
    {
     __delay_us(1);
    }
}

void fade_eyes(int n) // PWM sweep high f to low f
{
 int i;
  {
   for (i=0;i<n;i++)
    {
     GPIO = 0b11000101;
     vdelay(i);
     GPIO = 0b11000000;
     vdelay(n-i);
    }
   for (i=0;i<n;i++)
    {
     GPIO = 0b11000101;
     vdelay(n-i);
     GPIO = 0b11000000;
     vdelay(i);
    }
  }
}

void scan_eyes(int n) // PWM sweep high f to low f
{
 int i,j,k;
 int i1,i2,i3,pw1,pw2;
 uint8_t sGPIO;

 i1=1; i2=-1; pw1=0; pw2=n;
 sGPIO = GPIO;
 for (k=0;k<6;k++)
 {
  for (j=0;j<n;j++)
   {
    for (i=0;i<n;i++)
     {
      if (i>pw1)
       {
        sGPIO = sGPIO & 0b11111110;
       }
      else
       {
        sGPIO = sGPIO | 0b00000001;
       }
      if (i>pw2)
       {
        sGPIO = sGPIO & 0b11111011;
       }
      else
       {
        sGPIO = sGPIO | 0b00000100;
       }
      GPIO = sGPIO;
     }
    pw1 = pw1 + i1;
    pw2 = pw2 + i2;
   }
  i3 = i1; i1 = i2, i2 = i3;
 }
}

void dark_eyes(void) // PWM sweep high f to low f
{
 GPIO = 0b11000000;
 __delay_ms(1000);
}

void main()
{
uint8_t r,r2;

 init();

 while(1)
  {
   r=rand()%8;
   r2 = rand()%8+1;
   //r=3;
   switch (r)
    {
     case 1:
     fade_eyes(100*r2);
     break;

     case 2:
     fade_eyes(20*r2);
     break;

     case 3:
     scan_eyes(20*r2);
     break;

     default:
     dark_eyes();
    }
  }
}